Bulk Flow Analyst™ v19 is here!
Overland Conveyor Co. is excited and proud to announce the release of Bulk Flow Analyst Version 19.
Download & install BFA19 through the program - if the update screen does not load during startup, please check for
updates through the help menu.
A current Maintenance, Enhancements and Support (MES) agreement is necessary to update your BFA software. If you are not up to date or have any other questions,
please contact Brooke Rohde at firstname.lastname@example.org for more details.
Want to learn more about BFA 19? Learn all about the new features here.
Improvements & enhancements including:
Streamlined Material Characterization
Additional Library Materials
Added Model Preview
Bulk Flow Analyst™ v18.1 Released
Overland Conveyor Co. is excited and proud to announce the release of Bulk Flow Analyst Version 18.1.
We welcome any comments or suggestions about the new version so that we can continue to improve its
functionality and usability. The new version can be downloaded and installed through the program for
users up to date with MES. If the update screen does not load during startup, please check for
updates through the help menu. A current Maintenance, Enhancements and Support (MES) agreement is
necessary to receive Bulk Flow Anaylst™ 18.1. If you are not up to date or have any other questions,
please contact Tawna Kjera at email@example.com for more details.
Bulk Flow Analyst 18.1
Bulk Flow Analyst™ 18.1 contains a number of improvements and enhancements
Automated injection regions
More flexibility with injection faces
Ability to set the gravity direction
2D sprites (post-processing)
Simplified surfaces (post-processing)
Faster, upgraded DEMcloud simulations
Automated Injection Regions
Importing your 3D model into Bulk Flow Analyst™ Modeler has been the recommended way of interacting
with your model. One disadvantage to adjusting the injection region size and location was any
modifications needed to happen at the CAD level and re-imported into Bulk Flow Analyst™.
Version 18.1 provides the user the flexibility to add and adjust the injection region automatically
by referencing a discharge conveyor. The injection region will automatically be centered over the
discharge conveyor with the flexibility to change the height, length, width, clearance from the
discharge conveyor, and clearance from the tail.
More Flexibility with Injection Faces
Automated injection regions are best utilized with conveyors, but what if you have a unique
simulation to analyze? Injection faces have been updated to be oriented in any direction
necessary. In the past injection faces needed to be perpendicular to the z-axis and now they
can be askew from the z-axis.
Ability to Set the Gravity Direction
Bulk Flow Analyst™ previously needed the gravity vector to be oriented in the negative Z
direction. It was required to update the CAD model before importing the model in to Bulk
Flow Analyst™. Now changing the gravity direction is as easy as selecting the direction
in Bulk Flow Analyst™ in order to match your model.
2D Sprites (Post-Processing)
Bulk Flow Analyst™ 18.1 introduces the ability to use sprites as a display option for particles
in DEMView. Sprites offer better performance and a more realistic appearance than using single
spheres for visualization.*
* 2D sprites for screenshots and movies is currently still in development and will be released soon.
Simplified Surfaces (Post-Processing)
Bulk Flow Analyst™ 18.1 has the ability to hide co-planar edges for a simplified appearance.
The user has the option to turn this feature on and off to visualize how the program tessellated
the surface while a cleaner appearance for videos and images.
Faster, Upgraded DEMcloud Simulations
DEMcloud® simulations have been upgraded to take advantage of the newest computing power. The new
cloud simulations are able to run on the following specifications:
3.0 GHz Intel Xeon Platinum processors
72 GB memory
Bulk Flow Analyst 18.0
We have studied every facet of the software from user experience to the underlying
DEM engine. Bulk Flow Analyst™ 18 contains a number of improvements and enhancements
New Material Studio
Random Lump Shapes
Updated Material Library and New General Library
Ramped Belt Speeds
Simplified Material Characterization Test Procedure
Improved Simulation Speed
Updated User Interface
New Advanced Mode
New Request Audit
Updated Help Files
A current Maintenance, Enhancements and Support (MES) agreement is necessary to receive
Bulk Flow Anaylst™ 18 upon release. If your MES is expired or runs out by January 2018,
Overland Conveyor Co will send a renewal quote within a few business days. Renew MES
before Bulk Flow Analyst™ 18 is released and receive a discount. Please contact Tawna
Kjera at firstname.lastname@example.org for more details.
Our main goal for Bulk Flow Analyst™ 18 is making the user experience more intuitive
and easy to use. We understand the challenges of simulating your 3D model while
navigating the complexity and details of Discrete Element Modeling.
Bulk Flow Analyst™ was originally designed by engineers to help analyze and optimize
transfer chutes. Our project engineers at Overland Conveyor Co. use Bulk Flow Analyst™
to this day. We are in the unique position of experiencing the software, not only as
a developer, but as an engineer and user.
For this reason, we are focusing on regular online training for Bulk Flow Analyst™ 18.
Stay tuned for future LIVE events and schedule.
New Material Studio
Now you can input your size distribution directly into the software, and quickly select the desired
material sizes to simulate. The new Material Studio automatically calculates the mass fractions
based on your selected material sizes. The Material Studio will also automatically generate random
lump shapes for each material size to better approximate rock shapes. If you want to change the lump
shape, simply select a material size and regenerate.
Random Lump Shapes
Bulk Flow Analyst™ has progressed from single particles to preset lump shapes in previous versions,
and now we are proud to announce random lump shapes. Real life rock shapes are not symmetrical or
perfectly round. Now your simulated material won't be either. Build a unique lump shape for each
material size to better approximate the randomness of rocks.
Updated Material Library and New General Library
Some projects only need a concept design while others need a quick analysis of an existing design.
For the first time, Bulk Flow Analyst™ will include the new General Material Library. This will
have predetermined material properties based on your material density and angle of repose. It is
as easy as selecting your material and running a simulation. Even better, the General Material
Library will actively be updated.
The Material Library will be shown above the Project Material List for ease of opening, editing,
and saving materials. Multiple library files can be viewed at the same time, and reorganizing
materials is as fast as drag and drop.
Ramped Belt Speed
Bulk Flow Analyst™ 18 allows users to input a ramped speed duration to analyze starting and stopping conditions.
Simulate differential stop times and analyze the transfer chute capacity. Then start the receiving conveyor
back up and observe how the material is pulled away.
Simplified Material Characterization Test Procedures
Determining the Discrete Element Modeling parameters to accurately simulate your material is admittedly
the most difficult process in setting up simulations. We recognize this and material characterization
is a topic we discuss continuously.
The updated material characterization in Bulk Flow Analyst™ 18 has taken a more direct approach to gather
necessary data with quick, simple tests which could be performed onsite. The test results are used to run
the material characterization and optimized your material parameters.
Improved Simulation Speed
Run your simulations up to six times faster in some cases or simulate smaller particle sizes. The faster run time
allow engineers to analyze more design iterations quickly. The smaller particle sizes provide a more detailed
final simulation and reveals where additional refinement on final designs may need to be considered.
Updated User Interface
We have updated the user interface to include toolbars on each tab and moved the Modeler controls above the model
as a ribbon. The dividers between lists and the on the material studio can be dragged to create a custom look
and feel. A new advanced mode has also been added to clean up the user interface when advanced mode is unchecked.
New Advanced Mode
We simplified which parameters are shown for basic mode while providing the flexibility to change any parameter in
advanced mode. Is adhesion or curvature mesh quality not necessary? Leave the program in basic mode and have a
New Request Audit
Need help with your simulation? Request Audit allows you to send your project file and any additional files
to OCC to review. Fill out the form and we will contact you as soon as possible.
Updated Help Files
We completely reworked the Bulk Flow Analyst™ help files from the ground up. The new structure breaks topics
into Preprocessing, Processing, and Postprocessing to make the help files more searchable and to keep your
focus on the project at hand.
Usability bugs were addressed on Modeler tab regarding the ability to select surfaces, lines, and points
DEMView bugs including auto/custom settings, saving results across sessions, and default camera settings
Material library bugs including an issue where libraries saved in different locations are not compatible
Fixed an issue with simulations that contain adhesion where materials would not adhere to the face and would get stick at the corners and/or edges
Bulk Flow Analyst™ v16.0 Release
Applied DEM announces today the release of Bulk Flow Analyst™ v.16.0.
This release features a new Gaussian particle size distribution for
Material Conditions, the ability to select more complex injection
geometries, and improvements to the maximum limit of useable components
in a simulation. The release also features several bug fixes.
Gaussian Particle Size
Users can now select “Gaussian” as a particle size distribution for Material
Condition components, and are also able to specify the average radius and
standard deviation (in radius units) to use for the distribution. The DEM
simulation will contain particles that have the specified average radius and
the total particle size range will be approximately plus or minus 3 times the
Bulk Flow Analyst™ 16.0 allows users to select any planar surface in their mode
l to extrude in the z-direction as an injection volume. These “injection faces”
are the recommended method of selecting an injection volume as they are more flexible
than selecting body diagonals.
For example, you may want to create injection boxes that are cylinders or injection
boxes that are hollow. This may be accomplished very easily using injection faces,
but cannot be specified using body diagonals. Body diagonals are still available
to use for legacy projects.
The user simply specifies the Injection Mode for the Injection Box, selects the
surface(s) in the model, and sets the Extrusion Length for the injection box.
In BFA Modeler, the extruded volume is shown as a transparent object.
Improvement to Maximum Usable Components
Simulations that previously failed to run due to the number of components
are no longer limited. Improvements have been made to the maximum number
of selected components when multiple components share the same properties.
Bulk Flow Analyst™ v15.1 Enhancements
Improvements to DEMcloud® time estimator
When we first implemented the DEMcloud, we created formulas for estimating the run-time of cloud-run simulations based off of
a set of simulations that we had run. These estimates were effective for simulations similar to our base cases.
However, there were some simulations that always caused the estimates to be thrown off. For example, simulations with
long run times, in the hundreds of seconds, would often cause the estimator to return several-thousand-hour estimates.
We have significantly improved the speed of processing. Results may vary depending on the situation, but there have been improvements in
the neighborhood of 30% for both DEMcloud and local simulations.
Improved component patterns to include support of paths with concavities
Clients using component patterns often had difficulties using them when their path had shape including a concave curve. With this
improvement, nearly any 2D shape can be used as a path. The example below shows a path with two concavities and the component
being patterned around it successfully.
Improved the Motion Manager's method of referencing components
Several items were improved in regard to how the motion manager works. There were some bugs fixed, but in addition to that
there was a change to the way that components are referenced. No longer do you have to remember the suface ID of the
component you need, the component name is listed next to the surface ID.
Material Characterization Simulations can now be run on the DEMcloud®
Material characterization simulations are a complex feature. Users enter results from physical tests performed on their materials,
and BFA runs simulation after simulation, adjusting material properties all the while, in an attempt to replicate the results
of those tests. Some of the tests use a particle count that is sufficiently high that each individual test takes a while to run.
In short, material characterization simulations, as convenient as they are, may take several hours to run on a user's local
workstation (depending a lot on the material being tested), primarily because these individual tests run in sequence, one at a time.
With version 15.1 we have added the ability for users to send their material characterization simulations to the DEMcloud®
for faster processing. Because many simulations can be run simultaneously on the cloud, as many as 8 individual tests can be running at once,
allowing the material characterization simulation to finish in a fraction of the time! To make them even easier to use, we are
offering material characterization simulations on the DEMcloud at a very affordable price. Try one today!
Bulk Flow Analyst™ v15.0 New Features
Applied DEM introduced the ability to define clusters several releases back. Clusters give users the ability to define a
particle shape that isn't purely spherical which allows the geometry to drive how the particle moves. In previous versions
of the software, users had to define multiple material condition components to define multiple cluster shapes. Each time an
injection box was added to a simulation, users would have to add each of the material conditions and apply the approriate
breakdown of mass contributed by each material condition. Starting in version 15.0, users can define multiple cluster
shapes in a material condition, much in the same way Custom size-distribution is used. The user specifies a number of
cluster shapes to use, then defines the shape and mass fraction this shape contributes to the material.
Particle Blocks Allow More Materials
Prior to BFA v15, Particle Block components (Uniform nor Random) could not accept a material condition with a material size
range. Particles had to be uniformly sized. For Random materials, this meant that the Min and Max size had to be equal.
Custom materials were simply not allowed. Clusters were not allowed at all.
Now users of Random particle blocks are able to use material conditions with a size range. Random materials and Custom materials
with size ranges can be generated within a particle block. Random particle blocks can also accept material conditions
generating clusters, whether those are custom clusters or not.
Motion Manager Makes a Strong Comeback!
Users of BFA prior to version 14 were able to use a tool called the Motion Manager, which allowed users to define complex
movements for components. Components were able to move and rotate, stop, reverse direction, and easily link one component's
motion to another moving component (think leg-bone connected to the thigh-bone). This tool simplified the definition of
common components like flop gates and dump bodies that remain stationary, then rotate, then remain stationary again. However,
it also allowed for the definition of more complex motions, such as bucket wheels rotating on two axes. Due to the change
of numerical engines, BFA version 14 did not include the Motion Manager. But it's back!
Enter the value of your component's surface ID on the center right, then use the translation, local rotation, and global
rotation tabs to specify distances and angles traveled in a given time range. Enter negative distances to move backward, overlap
motions, link this component's motion to another moving component, the possibilites are nearly limitless. Click "Save Files" and
run your simulation as usual. You can simulate extremely complex motions, all the while BFA will be determining how these
motions affect the flow of your materials.
Bulk Flow Analyst™ v14.3 New Features
We continue to develop and improve our DEM clusters and have added several useful features. We now support inserting
multiple cluster types from a single injection box. Also we've improved our internal calculations to allow larger clusters
made of more particles. With the ability to simulate larger clusters, we've also provided new shapes that are more
customizable and an option to generate a random cluster shape. Additionally, users may design their own clusters shapes
by specifiying particle size and location by hand. All of these are additionally supported by our new interactive cluster design
Providing new useful ways to view the data created by your DEM simulations is one of our top focuses. Our newest version
of DEMView supports coloring particles by the cluster they belong to and by angular velocity. Additionally, we've
provided the tools to define different groups of particles and then color the particles based on these groups. This feature
can be useful for clearly identifying flow patterns in hoppers and silos. To see a demo of this feature
Bulk Flow Analyst™ v14.2 New Features
Material Characterization Simulations
We're very proud to introduce our Material Characterization Simulations. Using commonly known properties of your material
this tool runs a series of simulations back-to-back which work towards optimizing your material properties for DEM.
These characterization tests all generate pdf reports of the results and automatically add the optimized material to your simulation!
Simplified Cohesion Properties
Defining cohesive properties has been made much easier as well. All that's needed to provide the general description of how cohesive
your material is, and BFA will calculate appropriate values to use for the material.
Easily Hide Components
Using BFA Modeler you can now hide entire components as once, preventing the need to pick every face you wish to hide.
Improved Cluster Simulation Stability
Fine tunning and minor adjustments have been made to clustered materials. These simulations will save faster and
run much smoother than in the past.
Bulk Flow Analyst™ v14.1 New Features
DEMView Interface and Speed Improvements!
The DEMView interface has been given a large facelift, it's now faster and easier to use. We've added a timeline
to quickly move through time in your finished simulations which includes a Play button to animate DEMView. We've improved
the speed of DEMView while panning, zooming, and rotating by decreasing particle quality automatically during these actions.
Overall draw speed of each frame is increased and so is video creation speed!
Video Creation On The Cloud
Using DEMView to specify the desired view and setting, you can now create videos for cloud simulations using the cloud. This
prevents you from having to download potentially large results files to your local machine.
Looser File Structure
BFA now allows you to save your simulations wherever you want instead of only in the project folder. We've also removed the
restriction of your project having to exist in a folder of the same name.
Bulk Flow Analyst™ v14 New Features
Enhanced Cloud Security
The safety and protection of your data is our highest priority. We've updated and enhanced our encryption data and
database security to keep your simulation data safe.
View all recent changes.